Popular Articles
Master Programming Guide for Fleck SXT Controllers
SXT Master Programming Chart Below is a chart showing all available option on the SXT controllers. Not every system will have all options. DO NOT change these settings unless instructed by a professional, as incorrect settings can impact system ...
Installation Instructions for Water Softeners with Fleck 2510, 2510SXT, 5600 and 5600SXT
A printable version of our installation instructions are attached to this article. The quick start guide will be the most updated to use. Please read the FAQ section in the quick start guide.
How to Change or Replace your Filter Media or Softening Resin
Put the unit in bypass, then hold the extra cycle button on the display for 5 seconds to initiate a backwash. When the drain line is opened you will hear the pressure released down the drain. Once the pressure has been released, you can unplug the ...
Water Softener Sizing
What size of softener do I need? Water softeners are sized according to the grain capacity they are capable of removing between regenerations. A 48k or 48,000 grain system is capable of removing 48,000 grains of hardness between regenerations based ...
Basic Softener Programming of SXT Controllers
Quick Start Guide (USER Programming) USER programming settings will be dependent on YOUR situation. Use the guide below to program the correct settings. There is not an average or generalized setting that can be used for hardness. You will need to ...